Give Your Automotive Technician Some Respect

Tim Scully asked:




There is a dark cloud that seems to hang over the automotive repair industry. It is unfortunate that there is still a large part of the general public that thinks every repair shop is out to get them and that their expertise is over rated. Even in the industry itself, the stigma is played upon. Competitors accuse others of wrong doing to make themselves look good, and in the end are simply hurting themselves. There are automotive self help web sites that bash the professional technician.

Let’s spread a little subjective light on the subject. Run a search on the internet though any search engine for home dental work. It is not very likely the results you yield will give you step by step instructions for filling a cavity or performing a root canal in your kitchen. You will not find dental tools at the local “Dental Zone”. These things don’t exist because you would only have a trained professional work on your teeth. The tools available to them are not for general public use. The same is true for automotive repair, but the general public seems to think otherwise.

Professional automotive technicians spend a lot of money on tools that are not found at the local auto store. A tech may spend $2500 every year in tools for his or her entire career. That is a personal expense so that they can perform repairs effectively and efficiently. They make that investment out of pocket so that they can be the best at what they do. The tools that they use to repair vehicles is constantly being updated and adapted to the technology that goes into vehicles. These technicians spend their money on tools to fix cars, and the companies that employ them spend money to train them on the new technologies. I am pretty sure that dentists are spending a good amount of money on new equipment and have seminars to stay current on advances in dentistry. And this is not the only similarity.

The work that your technician does also has some pretty serious impact. Just as a dentist that does a procedure incorrectly and causes injury, a technician not performing his repairs correctly can cause injury. It is important for both of these professionals to know what they are doing. If they do not, people get hurt, or on a lesser note, miss work, lose money, and are overall inconvenienced. There are many similarities to the importance, training, and equipment that go into these two professions, but what about the differences?

There are many differences. Let’s start out with the fact that the technician has to work in environments that are hot, cold, dirty, and sometimes pretty close to unbearable. I ask how many of us would like to stand under a vehicle with a hot engine, arms straight up in the air for 30 minutes at a time in a shop that’s 90 degrees? Or how would you like to go and repair an ignition problem when its 10 degrees, and have to do it outside because the vehicle cannot be towed in to the shop? The rest of the day you can spend bent over burning and cutting your hands while you use that new $300 tool you paid for.

When you go to the dentist for a routine check up, you don’t argue after being checked that “he just looked at my teeth” and since he didn’t do anything you should not pay. But everyday in automotive repair shops, customers argue that exact point. The dentist charges for his time as a professional. He charges for the chair you sat in and the tools he used to look at your teeth. He charges for the schooling and experience that make him qualified in his profession. The automotive repair shop does the same, only customers feel that they can argue the point.

It seems that there a are a whole lot of people who know everything there is to know about car repair and the business. Yet with all of their automotive knowledge, they choose a different profession. Maybe it’s the long hours, the hard working conditions, the constant learning, or serious personal investment that it take to be an professional automotive technician, but I think it might also be that they don’t know what they’re talking about.

There are many repairs that the mechanically inclined “back yard mechanic” can perform. The simple repairs are fine to do yourself with the right reference material and general tools. When it comes to diagnosing vehicles with problems and repairing complicated systems that require special tools, the money you pay for that repair is justified, well justified. So give your technicians the respect that they deserve for performing a professional service that most of the public is not even capable of doing, even if they invest $10,000 in tools to get the job done.

Kansieo.com
Tags: , ,

Automotive Industry – The Fascinating History

Ken Geers asked:




It is always fascinating to take a look at the creation of products that we rely on so unconsciously in our daily lives. None is more exciting than the history of the automotive industry. History credits a French engineer by the name of Nicolas-Joseph Cugnot for building the first automobile in 1769. This vehicle was more like a military tractor with three wheels than what we know of as a car. The engine ran on steam and could only run for fifteen minutes at a time. The steam engine evolved as various inventors were able to obtain patents and in 1806 the trend started with cars operating with internal combustion engines which ran on gasoline.

The history of the automotive industry truly came of age in 1903 when Henry Ford started an automobile empire in a converted factory. His company became one of the few to survive the Great Depression. In 1914 Ford started producing cars in bulk by creating what we know as assembly lines. This was the point where the automobile began its popularity. The U.S. dominated the industry around the world until the end of World War II in 1945. At that time nations that were technologically advanced such as Germany and Japan were able to gain momentum and become serious competition within the automobile industry.

The success seen in the history of the automotive industry is due to three basic factors; price, quality and depreciation. Cars have always continued to get more expensive. A car such as a Cadillac Seville, as an example, retailed for around $20,000 in 1989. That same car in a model produced just five years later retailed at $36,000. The quality of cars continues to evolve as well. They are truly built to last. The depreciation of new cars continues to remain consistent. You can expect a car to lose about 28% of its value the moment it is driven off the dealership lot.

The history of the automotive industry would not be complete without a look into the future. With the trend of manufacturers to produce “green” vehicles we are seeing a surge of hybrid and hydrogen cars with many new and innovative ideas waiting for production. The goal is to produce a vehicle that is environmentally safe while still cost effective and affordable. Cars that we only dream about today are destined to become a reality tomorrow.

Automotive
Tags: , ,

About Automotive Parts

Hamza Ejaz asked:




Automotive parts are the different components (or spare parts) of an automobile. Every automobile owner will have to shop for automotive parts sooner or later. Contrary to popular belief, automotive parts are not manufactured only by the original manufacturing company (of your automobile) but also by various independent (engineering) companies that specialize in manufacturing and installing automotive parts of a diverse range of automobiles of different makes and models.

Automotive parts (manufactured by the original manufacturing company of your automobile) are expensive in most cases. When you factor in the repair or installation charges you will have to pay at the workshop and cost of alternative transport, you would realize that it will make more financial sense to buy your automobile and purchase a new one.

Most car enthusiasts can and do have a certain degree of technical know-how and generic tools that are useful for basic repair work. If you have undertaken thorough research and explored all the options before purchasing the automotive parts, you would probably have purchased them at a reasonable price. A large number of car enthusiasts save hundreds of dollars just because they have technical know-how and generic tools that allow them to do basic repair work and installation of their vehicles at home. Availability of automotive parts was a huge constraint some time back. Automobile owners could buy second hand parts from their repair workshop or order them from the original manufacturing company of their automobile.

Experts recommend investing in original equipment manufacturer automotive parts despite the fact that they are more expensive because they are superior in quality, more reliable and are made for the specific make and model of your automobile. On the other hand, aftermarket parts are manufactured for your car by companies other than the original manufacturer and are designed (generically) for several (makes and models of) cars. The performance of aftermarket parts is unreliable at best.

Moreover, because they are manufactured by relatively smaller (and unknown companies) there are no guarantees for aftermarket parts available in the market. Thus, do not be lured by the substantially lower price of aftermarket parts because chances are that they would make you spend more in the long run than original equipment manufacturer parts! It should also be kept in mind that original equipment manufacturer parts are not necessarily manufactured by your automobile’s manufacturing company but one or more other companies that have been authorized to manufacture these parts by your automobile’s manufacturing company.

Automotive
Tags: , ,
Powered by WordPress